EVO Manufacturing

EVO MFG Tailgate Vent Delete Plates are pre-drilled to accept a license plate. Powder coated for a clean finish and corrosion protection. Easy install using factory hardware. Factory vent removal required. Works with both wide and tall tailgate vents. Proudly Made 100% In USA...

The EVO MFG Winch Fairlead Light Mount is constructed from 3/16” steel plate which is CNC laser cut and formed with precision CNC press brake. Proudly Made 100% In USA...

EVO HD SwayBar EndLinks are made of solid hex bar and are adjustable in length. They come with 1/2" studded Teflon lined rod ends, 3/4" hex bar linkage and all necessary hardware. Offered in lengths ranging from 5.5" to 15.9" Use these to beef up a very important component of your suspension system...

Constructed from 3/16" steel, this skid plate is 100% bolt on and powdercoated black for a clean finish and corrosion resistance. All hardware Included. Proudly Made 100% In USA...

The EVO MFG 4.5" (Gas) Fusion Suspension Kit for Jeep Gladiator JT is the perfect suspension system when looking for great ride quality, maintaining factory tow rating, and improvement of off-road performance. This suspension kit is compatible with both a daily driver and a weekend wheeler. When off..

EVO MFG LCG front Bolt-On Coilover Kit for Jeep Wrangler JL is built on a foundation in the first and most proven coilover systems for the Wrangler JL. The EVO MFG LCG Bolt-On Coilover kit comes complete with all necessary parts to easily convert your JL from the limited coil and shock system to a f..

The EVO Manufacturing Long Arm Compatible ProTek Exhaust and Transmission Crossmember Skid Plate protects the important and expensive engine and drive line components on the underside of your Jeep Wrangler JK. EVO Manufacturing designed their ProTek skid plate system to be heavy duty and rugged enou..

EVO MFG 3 Degree Axle Mount brackets fit all joints that are 2 5/8” wide (Typical Jeep lower control arm width). Laser cut from 3/16" steel which can be used for 3 link, 4 link or radius arm configurations. 3 degree angle off axle tube. Tongue and groove assembly makes for easy fitment. Comes un-wel..

The EVO MFG Rear Bumpstop Kit is precision laser cut from 3/16” steel tube with internal strengthening gussets. The offset bump stop pad increases clearance with rear factory trackbar mount. Bolt on installation to the rear axle Black powder coated finish provides a great finish and corrosion resist..

The EVO MFG Rock Skins are side armor plates are CNC bent and laser cut from 3/16 steel. These can be used with all factory Jeep sliders and steps as well as all aftermarket frame mounted rock sliders. The Rock Skins protection contours around stock and aftermarket fenders (factory mounting location..

When out on the trail and in the rocks, clearance and departure can mean make or break on certain obstacles. Just a few extra inches can be all it takes to get hung up, stuck or damaged. The EVO MFG JK/JKU High and Tight (HnT) Rear Bumper gives you the clearance, body coverage and confidence to take..

EVO Manufacturing HD Raised Trackbar Bracket with Ram Assist Mount This kit replaces the very weak factory Jeep Wrangler JK front trackbar bracket on both Dana 30 and 44 axles and replaces it with a extremely strong formed Steel, internally gusseted and keyed bracket assembly. It can be used with a ..

EVO MFG LCG front Bolt-On Coilover Kit for Jeep Wrangler JK is built on a foundation in the first and most proven coilover systems for the Wrangler JK. The EVO MFG LCG Bolt-On Coilover kit comes complete with all necessary parts to easily convert your JK from the limited coil and shock system to a f..

The EVO MFG Front Vented Inner Fenders for Jeep Wrangler JK 2-door & Unlimited 4-door are made from 16 Gauge 5052 aluminum alloy. The Front Vented Inner Fenders are engineered to not only protect the inner fender wells but provide a ventilation path with a front and rear vent allowing for heat to ex..

The EVO Rear Raised Trackbar Bracket for Jeep Wrangler JL Vehicles corrects one of the most important handling characteristics of your Jeep. This characteristic is called the Roll Center geometry. The EVO Rear Raised Trackbar Bracket will help recenter the axle after lifting your Jeep 3" or more, as..

The Factory Rubicon Swaybar Disconnect is a great feature but is prone to failure, shorting out and all around being annoying. The EVO NoLimits Manual Disconnect now allows you to defeat the overly troublesome computer system that operates this very cool feature that JK Rubicons come with. The manua..

EVO MFG 100% bolt on manual transmission skid plate can be installed with supplied hardware. Powder coated black for maximum corrosion resistance. Proudly Made 100% In USA...

EVO Enforcer Front Upper Control Arm's for Jeep Wrangler JL & Unlimited JL adjust the camber and caster for maximum handling and performance. These control arms allow for changes when fine-tuning suspension alignment angles. If you lifted your Jeep without upgrading the control arms, your axle is be..

..

These rear lower control arm skids with shock relocation bracket built in will give you 1.5" of increased ground clearance under the lower control arm and raise the lower shock mount 2" for max articulation. Made from laser cut and CNC bent 3/16" steel plate. Fully Boxed skid on the bottom and powde..

The JK Front axle is prone to bending causing a costly replacement. The EVO MFG JK ProTek Front Axle Truss is specifically designed to give the axle ample strength to prevent deflection. Manufactured from 3/16” Laser cut steel and CNC press brake formed one piece sections that minimize excess heat a..

EVO MFG Rear Bumper Fascia is excellent addition to the EVO MFG line. Instead of running the heavy clunky rear bumper this works excellent to give your JK a finished look. Made out of 3/16" steel for durability it works with EVO MFG D-Ring mounts. This is the lightest rear bumper on the market Proud..

When lifting your JK 3” or greater, it is highly recommended to correct some of the steering geometry that has been altered with the lift. The EVO MFG JK Draglink Flip Kit does just that and more. This kit raises the trackbar mounting location 3” at the axle to help correct roll center and steering ..

The EVO MFG Rear Rockskin Corners are designed to protect the JK's stock body panels from dents and scratches that can be sustained while tackling a difficult trail. Manufactured from 3/16" laser cut steel plate, they feature a cut-out to accommodate the gas filler. The rear corners offer rounded ed..