D-Rings & Snatch Blocks

This forged steel clevis shackle provides a means for connecting the looped ends of cables, straps, and snatch blocks. The shackle's pin is threaded to allow easy removal. For maximum protection against wear and abrasion, the premium shackle uses Cerakote coating. 1/2" (12.7mm) Epic Shackle - 5,000 ..

VooDoo soft shackles are the best way to connect your recovery rope or tow strap to your Jeep. The one piece construction make them flexible enough to go around most pulling points & their 20,000lb breaking point make them strong enough to withstand most situations...

Used properly, the multi-purpose snatch block can double the pulling power of any winch or change your pulling direction without damaging the rope. It also helps to reduce heat buildup and amp draw during recovery. Coated with Cerakote and able to accept both wire and synthetic rope, the forged stee..

Overlanding adventures in your Jeep or 4x4 call for a level of preparedness with quality constructed trail gear and rigging to help get you out of sticky situations. Overland Vehicle Systems 3/4 Inch 4.75 Ton D-Ring Recovery Shackles are a perfect addition to any recovery gear bag for the most seri..

Crown Automotive offers this 3/4" Galvanized D-Ring for vehicles with equipped bumpers or hitch receiver shanks. Working load limit of 9,600 lbs, requires 7/8" diameter hole...

The Quadratec molded polyurethane D-ring isolators snap into the inner perimeter of standard shackles providing cushioned protection for synthetic recovery lines. Isolator kits include two isolators that eliminate the metal to metal contact of the bumper and D-ring. The included 4 urethane washers i..

Grab a few extras or replace those nasty, rusted and bent rings. Our 3/4" D-Rings feature 7/8" diameter screw pins with a 4-3/4 ton working load limit. Shackle design exceeds 5 times it's load limit in our independent testing. For bumper applications, our 3/4" D-Rings fit clevis tabs up to 1.25" thi..

This 3/4-inch D-Ring Shackle from Rugged Ridge is rated to 9,500 lbs. with a screw-pin design making it essential for effective vehicle recovery. Constructed of high-strength galvanized steel, this d-ring shackle is as brutally tough as the trail demands. No recovery gear kit is complete without D-r..

The WARN 3/4" Epic D-Ring Shackle offers premium recovery in style. Mounting to most bumper D-ring tabs and adding aggression to the front or rear bumper with some real purpose. This forged steel clevis shackle provides a means for connecting the looped ends of cables, straps, and snatch blocks. The..

This Crown Automotive Rough Trail™ Stainless Steel D-Ring is the perfect match of form and function for your Jeep. If you are looking to add a little eye-catching detail to your bumper and still want to be able to use for recovery, this 3/4" polished stainless steel shackle is the ticket. With a wor..

D-Ring Shackles are of a ¾” size and come with a 7/8” diameter pin. Sold individually, these D-Rings fit any Warrior bumpers with D-ring brackets. D-Rings are available in both cast iron (#2100) and/or polished stainless steel (#2105)...

Recovery Strength: Precision machined from 6061-T6 aircraft-grade aluminum and machined smooth to prevent shackle or winch rope damage. Reliably Durable: Certified breaking strength of 31,000-plus lbs. with a working load limit of 10,000 lbs. ensures maximum performance in all trail situations. Simp..

Recovery Strength: Precision machined from 6061-T6 aircraft-grade aluminum and machined smooth to prevent shackle or winch rope damage. Reliably Durable: Certified breaking strength of 31,000-plus lbs. with a working load limit of 10,000 lbs. ensures maximum performance in all trail situations. Simp..

Recovery Strength: Precision machined from 6061-T6 aircraft-grade aluminum and machined smooth to prevent shackle or winch rope damage. Reliably Durable: Certified breaking strength of 31,000-plus lbs. with a working load limit of 10,000 lbs. ensures maximum performance in all trail situations. Simp..

Recovery Strength: Precision machined from 6061-T6 aircraft-grade aluminum and machined smooth to prevent shackle or winch rope damage. Reliably Durable: Certified breaking strength of 31,000-plus lbs. with a working load limit of 10,000 lbs. ensures maximum performance in all trail situations. Simp..

Recovery Strength: Precision machined from 6061-T6 aircraft-grade aluminum and machined smooth to prevent shackle or winch rope damage. Reliably Durable: Certified breaking strength of 31,000-plus lbs. with a working load limit of 10,000 lbs. ensures maximum performance in all trail situations. Simp..

Recovery Strength: Precision machined from 6061-T6 aircraft-grade aluminum and machined smooth to prevent shackle or winch rope damage. Reliably Durable: Certified breaking strength of 31,000-plus lbs. with a working load limit of 10,000 lbs. ensures maximum performance in all trail situations. Simp..

Grab a few extras or replace those nasty, rusted and bent rings. Our 5/8" D-Rings feature 3/4" diameter screw pins with a 3-1/4 ton working load limit. Shackle design exceeds 5 times its load limit in our independent testing. For bumper applications, our 5/8" D-Rings fit clevis tabs up to 1" thick. ..

These may be the last D-Rings that you'll ever have to buy. Dress up a shackle bumper or add some to your tool chest with the Crown Automotive Stainless Steel D-Ring Made from polished 316 series stainless steel for a lifetime of good looks without the rust and the flaking paint. The polished surfa..

This pair of black D-shackles from Rugged Ridge have a 7/8-inch pin and a 13,500 pound Working Load Limit. Please Note: This D-ring has a 1" diameter pin instead of the normal 3/4" diameter. NOT compatible with most bumper tabs...

This pair of heavy duty powder-coated red D-shackles from Rugged Ridge have a 7/8-inch pin and a 13,500 pound working load limit (WLL) and are the shackles you will need for recovering full size trucks and Hummers. Please Note: This D-ring has a 1" diameter pin instead of the normal 3/4" diameter. N..

Improve your recovery kit with an AEV Snatch Block. This heavy-duty winching accessory can double the pulling power of your winch by using a double-line pull. Never worry about getting your Jeep stuck again with the AEV Snatch Block. With a working load limit of 13K pounds, this Snatch Block can eas..

Complete your build in style with a set of Billet D-Ring Shackles with Bottle Opener Pins from American Trail Products. These attractive shackles are milled from 6061-T6 billet aluminum, for a product that is both heavy duty and light weight. The steel D-Ring pins feature built in bottle openers, so..

Do you have a noisy ride or a chipped up bumper from clanging d-rings? The Crown Automotive Anti-Rattle D-Ring Spacer for 3/4" D-Rings can restore the silence. This tapered spacer is to be used on d-ring shackles with 7/8" pins to prevent lateral movement that allows the shackle to make contact and ..