Synergy Manufacturing

This Bracket is designed to distribute the increased load the track bar bracket encounters on a lifted Jeep. The Added track bar bracket thickness prevents the track bar bolt from ovalizing out the stock mount. It's Bolt on fix for those who already have an ovalized track bar bracket bolt hole. Lase..

Jeep JK Lower Rear Bump Stops Bump Stops bolt on to axle and provide 3" to 4" of extra limitation for larger tiresManufactured from laser cut 3/16" Steel, CNC bent, and welded for superior durabilityMade in USA..

Improve the ride quality in your lifted Jeep Wrangler JL or Gladiator JT with a set of Synergy Manufacturing Front Lift Coil Springs. These multi-rate coil springs provide improved handling, comfort, and suspension articulation. Synergy designed these springs to not sag or bow overtime. Each side-sp..

The Synergy Suspension Billet Aluminum Sway Bar Relocation Bracket is designed to move the sway bar down 1" and back 1-7/16" for added clearance when using JK Rear Long Travel Upper Shock Mount Kit. These can be used in other large diameter shock applications where additional clearance is needed fro..

Improve the ground clearance and suspension travel in your Jeep Wrangler JL with Synergy Manufacturing Rear Lower Shock Relocation Brackets. These 100% bolt-on brackets are CNC formed from 3/16in steel plate. These brackets will allow you to retain your factory shocks, even on a lifted Jeep...

Swapping your stock brake lines to this Stainless Braided Brake Line Kit is a multi-faceted upgrade. If your Jeep Gladiator JT is at factory ride height, these lines provide a stiffer feel to your pedal and can even increase the overall braking ability and control of your Jeep. This is due to the ex..

These are manufactured from 3/16" crush resistant Grade 50 A-572 steel plate to reduce weight while not sacrificing strength. Flush mount Grade 8 hardware provides a 100% smooth skid surface. Premium powder coat finish for maximum corrosion resistance. Precision CNC cut and formed for an unrivaled f..

Synergy Dual Durometer Bushings (DDB) feature a maintenance free, grease less design.Self centering with 30 degrees of misalignment. The Outer "soft" durometer acts as bushing cushion and flex material while the inner "hard" durometer lining acts as the bearing surface to allow free floating inner s..

Upgrade to a Synergy Heavy Duty Drag Link in your Jeep Wrangler JL for offroad reliability and strength. This premium fully welded drag link is CNC formed from 1.5" x .250 wall tubing with heavy duty metal on metal tie rod ends. These ends include grease fittings and replaceable dust boots for optim..

Front Upper Control Arms for 2-Door & 4-Door Jeep JKs Suspension components feature an abrasive resistant powder coat finish for maximum durability and corrosion resistanceMade from high quality crush resistant 1-3/4" X .188 Wall 1026 DOM tubingFeatures OEM style fork end so the existing bushing..

Have your Jeep Wrangler JK ready for the trails with the Synergy Front Axle Truss. Offering applications for the the Rubicon Dana 44 and non-Rubicon Dana 30 front axle. CNC formed from 3/16" steel giving your front axle housing significantly more strength to endure a bashing. Be sure to purchase the..

Synergy Dual Durometer Bushings (DDB) feature a maintenance free, grease less design.Self centering with 30 degrees of misalignment. The Outer "soft" durometer acts as bushing cushion and flex material while the inner "hard" durometer lining acts as the bearing surface to allow free floating inner s..

Would you trust metal on plastic ball joints in your Jeep Wrangler JL or Gladiator JT? Upgrade from your factory plastic nylon bearing design to Synergy's greaseable metal on metal Heavy-Duty Ball Joint Kit! Reduce the overall wear and increase the longevity of your ball joints, especially for lifte..

Properly center the rear axle of your Jeep Wrangler JL with a Synergy Manufacturing Adjustable Rear Track Bar. This heavy-duty bolt-on adjustable track bar is compatible with 0-6in of lift. By using 1.50-inch .250 wall DOM tubing, Synergy has designed a track bar that can hold up to any off-road abu..

Improve the ride quality in your lifted Jeep Wrangler JL with a set of Synergy Manufacturing Rear Lift Coil Springs. These multi-rate coil springs provide improved handling, comfort, and suspension articulation. Synergy designed these springs to not sag or bow overtime. Each side-specific spring is ..

After lifting your Wrangler JL or Gladiator JT, you may have noticed the front end is not as solid as it used to be. Bring strength and rigidity back to your Jeep with the Synergy Manufacturing Front Track Bar Brace & Sector Shaft Brace. Lift kits put unnecessary wear and tear on steering and suspen..

Synergy Heavy Duty Metal-on-Metal Tie Rod End. Fully greasable sintered metal on metal bushing design has high wear resistance. Specially designed grease grooves in the OD of the ball to allow for maximum lubrication. Spring loaded bearing design keeps pressure on bearings and keeps the joint tight ..

Synergy Suspension Wheel Spacers are Wheel hub centric for increased strength. CNC machined from billet 6061-T6 aluminum. Features corrosion resistant red anodizing with High grade wheel studs & lug nuts. Can be used with factory or after market wheels. Includes Loctite. Sold in pairs...

These rear axle spring pads are used to correct the spring angle when lifting your JK. They feature a coil retainer which keeps the coil from popping off the lower spring pad during extreme articulation. Designed to fit stock JK rear housings (3 1/8" axle diameter). Sold in pairs. Made in USA..

JK Front Sway Bar Quick Disconnect Pins and Holding Brackets, convert your Sway Bar Links into Quick Disconnects. Will not work wit OE Sway Bar Links or other manufacturer links. Made in USA..

The Synergy Jeep JK Low Misalignment Tie Rod End (TRE) Dust Boot has been designed to exclusively fit Synergy 4131-L TRE's used in the Synergy Jeep JK 8002 Tie Rod. This part is designed to limit TRE misalignment, specifically addressing tie rod flop commonly associated with hydro assist application..

The Synergy Manufacturing Drag Link for TJ/LJ, XJ, ZJ, and MJ models is made from 1-3/8" 1018 Solid Bar to eliminate any deflection. This HD Drag Link is finished with an abrasive-resistant powder coat finish for maximum durability and corrosion resistance. The Drag Link features our Double Adjuster..

These are manufactured from 3/16" crush resistant Grade 50 A-572 steel plate to reduce weight while not sacrificing strength. Flush mount Grade 8 hardware provides a 100% smooth skid surface. Premium powder coat finish for maximum corrosion resistance. Precision CNC cut and formed for an unrivaled f..

The Synergy Jeep JK Heavy Duty Front Lower Control Arm Frame Brackets replace the weak factory front lower control arm mounts on the frame which often get destroyed from wheeling. Laser cut & CNC formed from high strength 3/16" steel. Designed to locate control arms in the factory location. Built in..