Synergy Manufacturing

When you lift your Jeep Gladiator JT the axle will move slightly out of proper alignment from under the vehicle. This can cause issues with wandering/tracking as well as bump steer. To resolve this, installing front and Rear Adjustable Track Bars is exactly what you need! Not only will this Track Ba..

Poly Performance coils offer excellent off road performance while preserving ride quality. Progressively wound; keeps spring from coming unbound at suspension droop and eliminate annoying spring clanking found on most suspension kits. Springs are powder coated black. Provide 5.5" Lift on Wrangler TJ..

Bent to clear most aftermarket differential coversRetains factory track bar mounting bolts & hardwareMade from high quality 1.5" diameter .250" wall DOM tubingAllows centering of front axle when running a suspension liftII stage powdercoated dark gray finish for maximum durabilityFK Bearin..

These relocation brackets will give you an additional 2" of down travel without affecting the up travel for your 0-2" lift shocks when used with the correct bump stops or spacers. Your shocks will be moved slightly inboard giving you better tire clearance also...

Steering Correction Kit PPM-8011 requires the drag link to be flipped to the top of the steering knuckle for increased ground clearance and to correct steering geometry on lifted Jeep JKs. This Adapter is designed to flip the taper on the steering knuckle and Eliminates the need for reaming the knuc..

The Synergy Suspension 2012+ Jeep JK Exhaust Spacer Kit Relocates the factory crossover pipe down and rearwards to allow for additional front drive shaft clearance. Necessary on any 2012 and newer JK with more than 2" of lift. Made from high quality 440 Stainless Steel tubing. Easy bolt on installat..

Synergy Dual Durometer Bushings (DDB) feature a maintenance free, grease less design.Self centering with 30 degrees of misalignment. The Outer "soft" durometer acts as bushing cushion and flex material while the inner "hard" durometer lining acts as the bearing surface to allow free floating inner s..

Synergy Jeep JK HD Metal on Metal Tie Rod End Boot for 4131. Sold Individually...

Synergy Dual Durometer Bushings (DDB) feature a maintenance free, grease less design.Self centering with 30 degrees of misalignment. The Outer "soft" durometer acts as bushing cushion and flex material while the inner "hard" durometer lining acts as the bearing surface to allow free floating inner s..

Outfit your Jeep Wrangler JK or Grand Cherokee WJ with the last set of ball joints you will ever need! The Synergy Manufacturing HD Adjustable Ball Joint Kit are a highly anticipated ball joint solution. Synergy spent five years and over 100k miles testing and fine tuning these ball joints. The fini..

Improve the ride in your Jeep Wrangler JL while reinforcing your suspension with the Synergy Manufacturing Rear Track Bar Relocation Bracket. This 100% bolt-on bracket is designed to raise the axle mounting location of the rear track bar by 3.25-inches, effectively lifting the Jeep’s roll center. By..

Synergy Wheel Spacer Replacement Stud & Lug Nut. Designed Specifically to fit Synergy Wheel Spacers. Sold Individually...

Improve the ride quality in your lifted Jeep Wrangler JL with a set of Synergy Manufacturing Rear Lift Coil Springs. These multi-rate coil springs provide improved handling, comfort, and suspension articulation. Synergy designed these springs to not sag or bow overtime. Each side-specific spring is ..

This New Bracket is designed to distribute the increased load that the stock track bar bracket encounters on a lifted Jeep. The Added track bar bracket thickness prevents the track bar bolt from ovalizing out the stock mount. Bolt on fix for those who already have an ovalized track bar bracket bolt ..

The Synergy MFG HD Tie Rod for TJ/LJ, XJ, ZJ, and MJ models is a larger and stronger, bolt-on replacement for stock steering. No reaming or drilling of the steering knuckles is required. This is a direct bolt-on Tie Rod is made from 1-3/8" 4130 Chromoly steel and is Heat Treated for maximum strength..

Gain increased suspension travel in your Jeep Wrangler JL with the Synergy Manufacturing Parking Brake Cable Relocation Bracket. Rear flex on lifted JL Wranglers can be limited by the parking brake cables, this 100% bolt-on bracket reduces binding and improves articulation. Made from precision laser..

The Synergy Front Coilover Conversion Kit will add ultimate flex and articulation to the front of your Jeep Wrangler JK. This kit includes the upper shock tower with integrated lower shock mount/bump stop pad. Cutting and welding is required. Removal of stock coil bucket, shock tower, and lower shoc..

Improve the handling in your lifted Jeep Wrangler JL with Synergy Manufacturing Rear Sway Bar Links. These adjustable extended sway bar end links are designed for use with 2 or more inches of lift. They feature a heavy-duty design, and are made from solid 11/16in steel bar with high quality rod ends..

Synergy Lithium Complex Extreme Pressure (EP) Grease is powered by Micro-Armor Solid-Film Lubrication Technology, which utilizes patented "micro-particles" to outperform ALL other grease technologies in extreme friction applications by repairing and smoothing damaged metal surfaces while reducing fr..

Improve the ride quality and handling in your Jeep Wrangler JL or Gladiator JT with the Synergy Manufacturing Adjustable Front Upper Control Arms. This complete kit includes all eight control arms. Each arm is fully adjustable, and uses pinch bolts instead of the typical jam nuts. Unlike other contr..

These are manufactured from 3/16" crush resistant Grade 50 A-572 steel plate to reduce weight while not sacrificing strength. Flush mount Grade 8 hardware provides a 100% smooth skid surface. Premium Powder Coated Black Finish for maximum corrosion resistance or Now Available in Raw Finish. Precisio..

Designed to take place of cam bolts used on stock control arm mounts. Desirable for users who are removing cam bolts and upgrading to adjustable front lower control arms. Laser cut 3/16" high strength steel. Zinc plated for maximum corrosion resistance. Made in USA..

CNC machined from 1020 DOM material and zince plated from maximum corrosion resistance, the Synergy Suspension Tie Rod Clamp is compatible with the Synergy Suspension & Fox monotube steering stabilizers. Designed to mount the factory and aftermarket style steering stabilizers on the factory JK tie r..