Rock Slide Engineering

These Generation III Steps Sliders by Rock-Slide Engineering are specifically engineered for the Wrangler JL 4 Door, as a dual functioning full rock slider with a fully functional step that is actuated when the doors open and close. RSE utilizes 11-gauge steel for a super strong design that is both ..

Protection and clearance are always important when you take your Wrangler JL on the unpaved path. Not only is the Rigid Series Shorty Front Bumper with Bull Bar made from quality steel but the bull bar adds to protecting the front end of your Jeep. Having a winch is also key when you hit the trails ..

Beef up your Rock Slide Engineering Gen III Step Sliders with the Step Slider Skid Plates for your 18-20 Jeep Wrangler JL 2-Door. These skid plates cover the side and bottom of your existing Rock-Slide Engineering Gen III Step Sliders. Making your Jeep overland ready with ultimate protection from tr..

Rock-Slide Engineering manufactures this Rocker Guard Pair for the Wrangler JK 2-Door and is designed to provide coverage and protection from trail debris or possible side impact below the doors. The rocker guards are constructed from .090 Aluminum, and powder coated black for corrosion resistance. ..

The Rock Slide Engineering Door Delete Kit allows you to manually control your RSE Step Sliders when your Doors are removed. Every Jeep owner enjoys removing their doors for that open air feeling. This custom kit allows your electric steps to still function properly. One kit controls two doors, so b..

The Rock-Slide Engineering Rigid Front Bumper without Bullbar & with Winch Plate is manufactured from 10 gauge steel and powder coated textured black for a great finish right here in America. The built in winch plate mounts low, to allow for maximum airflow to the radiator. For some extra pull stren..

With the Rock-Slide Engineering Step Slider Skid Plate for the Jeep Gladiator JT 4-door, you can better protect the sides and bottom of the Step-Slider with a cut out for the step. This screws into your existing Step-Slider. Constructed in America with steel, this skid plate will fit on your 4-Door ..

The Rock Slide Engineering Gen III Step Sliders allow for easy access into your Jeep Wrangler JL 2-Door with ultimate rocker protection. The fully retractable design allows the step to hang down 12 inches for ease of entry when the door is opened and retract back when the door is closed. Allowing yo..

When tackling the trails in your Wrangler JK, JL, or JT you want to make sure that you have protection for the front grille of your Jeep. With the Rigid Series Bull Bar you can protect the front end of your existing Rock Slide Engineering Rigid Series Front Bumper. This Bull Bar is powder coated tex..

Tackle even the toughest trails with the Rock Slide Engineering Gen III Step Sliders. In addition to being a heavy-duty functional slider, the Gen III Step Sliders have a built-in step that extends when you open Jeep’s doors. RSE designed their Step Sliders to be plug-n-play, and the door sensors at..

The Rock Slide Engineering’s EZ Rack is an ultimate solution to store additional fuel or accessories. This EZ Rack comes with 2 plates made of 11-gauge steel and a 2-inch ratchet strap. Rock Slide Engineering uses a state-of-the-art automated powder coating system to acid etch the raw base material ..

The RSE - Rock Slide Engineering Front bumper is built with 3/16" alloy steel or aluminum construction and 1/4" mounting plates. Features include 2 recovery shackle points, integrated light pockets, which fit PIAA 520 Series Lights perfectly, and a lowered winch mount plate to maximize airflow throu..

Rock-Slide Engineering manufactures this Rocker Guard Pair for the Wrangler JL 4 Door, and is designed to provide coverage and protection from trail debris or possible side impact below the doors. The rocker guards are constructed from .090 Aluminum, and powder coated black for corrosion resistance...

These Rock-Slide Engineering Gen III Steps Sliders are specifically engineered for the Jeep Gladiator JT 4-Door, as a dual functioning full rock slider with a fully functional step that is actuated when the doors open and close. RSE utilizes 10-gauge steel for a super strong design that is both pro..

Rock-Slide Engineering's bullbar light kit allows operation of your winch in the dark without the need of a flashlight. Includes wiring harness, led light, switch, and in-line fuse. Installation instructions included. For use with RS-E Bumpers.Made in USA...

The Rock-Slide Engineering Rocker Guards are manufactured for the Wrangler JL 2-Door, and are designed to provide coverage and protection from trail debris or possible side impact below the doors. The rocker guards are constructed from .090 Aluminum, and powder coated black for corrosion resistance...

R-SE 50" LED light bar bracket is a bolt on application for easy install using existing lower windshield bracket bolts. Available powder coated in a textured black. Light bar sold separately.Made in the USA!..

The RSE - Rock Slide Engineering Front bumper is built with 3/16" alloy steel or aluminum construction and 1/4" mounting plates. Features include 2 recovery shackle points and a lowered winch mount plate to maximize airflow through the radiator. Other great features include a unique fabricated bull ..

Protection: Acts as a skid plate for the step slider by covering the bottom and sides to protect against rocks and everything else you may encounter while off-road. Construction: Made from 3/16" steel to take damage without sacrificing your Step Slider and finished with a textured black powder coat ..

With the Rock-Slide Engineering Gen III Step Slider Skid Plate for the Jeep Gladiator JT 4-door, you can better protect the sides and bottom of the Step-Slider with a cut out for the step. This screws into your existing Step-Slider. Constructed in America with steel, this skid plate will fit on you..

The Rigid Series Rear Bumper gives you a quality off-road bumper for your Wrangler JL that will allow you to carry up to a 31" spare tire. With the additional recovery points by way of shackle tabs and an integrated 2" receiver hitch this bumper is worthy of taking your off-road game to the next lev..

With the Rock-Slide Engineering Gen III Step Slider Skid Plate you can better protect the sides and bottom of the Step-Slider with a cut-out for the step. This screws into your existing Step-Slider. Constructed in America with steel, this skid plate will fit on your 4-Door Jeep Wrangler JL. Gen III ..

Made right here in America, the Rock-Slide Engineering Rigid Front Bumper with Bullbar & Winch Plate comes powder coated textured black, made from 10 gauge steel. With the winch mounted down low, this creates a clean design and allows for better airflow to your radiator. The bullbar serves as extra ..

The RSE - Rock Slide Engineering Front bumper is built with 3/16" alloy steel construction and 1/4" mounting plates. Includes 2 recovery shackle points, integrated light pockets, which fit KC Apollo 6" fog Lights perfectly, and a lowered winch mount plate to maximize airflow through the radiator. Ot..