Rock Hard 4X4

Designed to bolt onto the Rock Hard 4x4 front bumper for easy towing using your Road Master tow bar. Road Master uses a 3/4" pin connector..

This bracket will allow you to relocate your rear license plate to the center of your spare tire. You can also purchase this bracket with optional PlateLITE as a Combo. Both the License Plate Bracket and PlateLITE look great when paired with the Off Road Only LightDOTs...

Rock Hard Jeep Rear Bumpers for 76-06 CJ, YJ, and TJ model Jeeps are designed for heavy duty use. This Rear Bumper is full width to protect your vulnerable corner panels and tail gates. With end plates designed to provide maximum departure angle and clearance, Rock Hard's design prevents you from ge..

The Rock Hard 4x4 Patriot Series Tubular Rock Sliders for the Jeep Gladiator JT come in your choice of an Angled Up Tube or an Angled Down Tube. This slider rocker guard pair provides all the benefits of the low profile factory Rubicon rails plus a welded on tubular step that not only makes entry an..

Rock Hard 4x4 Parts Accessories Mounting Bracket makes it easy to mount your favorite electronic device. Mounts to 1-3/4" or 2-14" O.D. tubing and has a 1/4"x20 tapered threads in 3 directions...

If you are running larger tires on your Wrangler JL or Gladiator JT you might come across some rubbing when you are out on the trails. The Patriot Series Front Stubby Bumper from Rock Hard 4x4 is only the width of your grille giving you more room for larger tires and better approach angles while you..

The Rock Hard 4X4 A-Pillar Windshield Light Mounts offer a simple solution to add additional lighting to your Jeep Wrangler JL and Gladiator JT. A clean design that mounts into the factory original holes for a simple installation. Sold as a pair and lights are available separate...

This Rock Hard 4x4 Top of the Line Full Width front Bumper is made from 1/4” CNC laser cut and bent Steel Plate for consistent quality. Comes pre-drilled to accept our bolt on winch plate and brush guard. Two 5/8” x 2.5” CNC machined “D” Ring shackle mounts are included. All hardware included...

Running larger tires on your Wrangler JL has been made easier with the redesigned suspension & tire clearance. The problem you might come across though is having enough support to carry a larger spare tire. These Billet Aluminum Hinge Braces fit over your factory hinges giving you added strength to ..

Except no less than the best. Rock Hard 4x4 Parts makes the toughest heavy duty off-road rocks sliders and skid plates in the industry for the JK Wrangler, TJ Wrangler and the XJ Cherokee...

Protect the nose of your Jeep and it's radiator by adding a Front Bumper Hood Hoop..

Rock Hard 4x4 has an easy solution for mounting auxiliary lights to the front of your winch bumper. Simply bolt on between the bumper and the fairlead for two additional light tabs. Comes powder coated black with a slight texture...

Designed to bolt onto the Rock Hard 4x4 front bumper for easy towing using your Blue Ox tow bar. Blue Ox uses a 1/2" pin connector...

Rock Hard Cherokee XJ Front Bumpers are made out of 3/16" x 2" x 5 " thick tubing in the center and with outter edges that are made of 1/4" plate. This bumper comes pre-drilled to accept a bolt on winch plate made by Rock Hard 4x4 Parts. This bumper also comes with (2)-5/8" x 2-1/2" CNC D-Ring Shack..

Rock Hard Cherokee XJ Rear Bumper/Tire-Carriers are made out of 3/16" x 2" x 4" thick tubing in the center and with outter edges that are made of 1/4" plate. This bumper also comes with (2)-5/8" x 2-1/2" CNC D-Ring Shackle mounts with tabs that are welded on front, go through bumper and then welded ..

The ROCK Hard 4x4 Tubular Rock Sliders with Flat Step & Black Logo Plates for Jeep Wrangler JK 2 Door models are the ultimate rocker guard upgrade for wheelers of all skill levels. All the benefits of the low profile factory Rubicon rails plus a welded on tubular step that not only makes entry and e..

9500lb Capacity. 3/4" Clevis with 7/8" Pin Diameter...

Rock Hard Front Bumpers are designed for heavy duty use in the rocks. made of 3/16" x 2" x 4" tubing and come with an integrated CNC laser cut winch plate, roller fairlead mount and holes for lights at outer edge of winch plate. This bumper also comes with an angled forward hoop for the rock crawler..

If you are looking to mount a winch without changing your front bumper, Rock Hard 4x4 Winch Mount Plate for Factory Plastic Bumpers has you covered. This Winch Mount for Jeep Wrangler JL's & Gladiator JT's fits most brand winches with a standard bolt pattern. Simple installation with no drilling req..

This bumper is made from ¼" CNC Laser cut and bent steel or aluminum for consistent quality. Tapers down and back to protect the factory lower front cross frame and Sway-bar disconnect unit(if equipped). Provides the best possible approach angle without cutting of the factory frame. Winch is mounted..

The Adjustable Spare Tire Carrier with CB Antenna Mount from Rock Hard 4x4 allows you to carrier a larger tire then your stock one on your Wrangler JL without the need for a new rear bumper. The adjustable mount lifts your tire from the normal factory height to 6" above so you can fit a larger spare..

If you have a Freedom Series stubby front bumper on your Wrangler JL or Gladiator JT and want to add more front end protection the the Sway Bar Motor Skid Plate is the way to go. This all steel skid plate is a simple add on that will give you the best in protection while you are out on the trails...

Add style while protecting the nose of your XJ and it's radiator by adding a Front Bumper Hood Hoop from Rock Hard 4x4...