Hidden Hitch

Proportional based controls offer a smooth braking response to almost any stop. Through the use of a sensing device, the brake control can determine the tow vehicle's rate of deceleration and then apply the trailer brakes to match. In other words, Proportional controls deliver power to the trailer b..

Hidden Hitch T-One Connectors require no splicing of wires. Simply locate your vehicles wiring harness connector, unplug the connection and insert the T-Connector into the vehicle's harness. No special tools needed for installation...

This is our standard, non-powered model. It is the best in its class. Recommended for vehicles that do not require power isolation and are towing trailers with 2 or fewer clearance lights...

Packaged Hitch Ball, 1-7/8" x 1" x 2-1/8", 2,000 GTW Chrome..

Packaged Hitch Ball, 1-7/8" x 3/4" x 1-1/2", 2,000 GTW Chrome..

Some towing tasks call for a handy 2" front receiver. This unit from Hidden Hitch is the one for the job, because it was specifically designed for the Wrangler. The tough finish will last and last. Simple bolt-on installation with a limited lifetime warranty...

Towing with a tow bar requires that you have the appropriate lighting on the vehicle you are trailering. This simple and convenient kit is designed to provide you with quick visibility when moving broken-down or project vehicles with your rig. Features two magnetic lights that attach to metal surfac..

Proportional based controls offer a smooth braking response to almost any stop. Through the use of a sensing device, the brake control can determine the tow vehicle's rate of deceleration and then apply the trailer brakes to match. In other words, Proportional controls deliver power to the trailer b..

T-One connectors require no splicing of vehicle wires. Simply locate your vehicles wiring harness connector,unplug the connection and insert the T-One Connector into the vehicle's harness. No special tools required...

Hidden Hitch T-One Connectors require no splicing of wires. Simply locate your vehicles wiring harness connector, unplug the connection and insert the T-Connector into the vehicle's harness. No special tools needed for installation...

For use with all 2" standard receiver hitch. Heavy duty 5/8" Pin comes with necessary clip. Packaged 5/8" Hole Style Hitch Pin and Clip for 2" Sq. Receivers...

Quite simply, Receiver Hitches are the only way to go for a Jeep®. Since Jeeps® have a high-mounted chassis, most drawbar style hitches do not line up correctly with the trailer coupler. And since no two trailers seem to have the same optimum hitch height, you need flexibility. Receiver hitches allo..

..

Proportional based controls offer a smooth braking response to almost any stop. Through the use of a sensing device, the brake control can determine the tow vehicle's rate of deceleration and then apply the trailer brakes to match. In other words, Proportional controls deliver power to the trailer b..

Hidden Hitch T-One Connectors require no splicing of wires. Simply locate your vehicles wiring harness connector, unplug the connection and insert the T-Connector into the vehicle's harness. No special tools needed for installation and allows you to easily connect to a trailer...

The quick way to get wired for towing lighting. Full instructions included to get you on the road with your load!..

2" receiver ball mount with pin and clip.4" drop or 23/4" rise.9” long.1" Ball Hole.Hitch ball sold separately...

Your vehicle has the receiver it needs for trailering your tools, trailers, and toys. But when you remove the drawbar, what do you do about the low hanging receiver? It likely sits lower than the rest of the bumper. If the action gets extreme, a skid plate such as this will act as a buffer on steep ..

Hidden Hitch 1T-One Connectors require no splicing of wires. Simply locate your vehicles wiring harness connector, unplug the connection and insert the T-Connector into the vehicle's harness. No special tools required for installation...

Hitch Ball, 2-5/16" x 1-1/4" x 2-3/4", 12,000 lbs. GTW Chrome..

Hidden Hitch T-One Connectors require no splicing of wires. Simply locate your vehicles wiring harness connector, unplug the connection and insert the T-Connector into the vehicle's harness. No special tools needed for installation...

Do you ever wish that you did not have to permanently mount your winch on your vehicle? This front winch mount plate is the solution to that problem. Fits most all popular Warn Winches, and Superwinch Winches on this website. Such an elegant simple solution at a no-sweat price. Nothing beats the fle..

This Hitch Extension is Ideal for slide-out campers with extended overhangs. Designed to extend the receiver opening. 2" opening for use with standard ball mounts and hitch mounted accessories. For use with receivers only...

Hidden Hitch has got you covered with this new Pilot® Brake Controller. It works with 2-6 brakes (1-3 axle) systems. The Large easy-to-read dual digital display shows Properly wired control, Voltage output to brakes, and Connection to trailer. Dark smoke lens ideal for direct light applications whic..